Why Is My Dishwasher Leaking?

You had a pretty rough day working extra hours at your office and all you need now is some proper delicacy and you expect everything to be just perfect. However, as soon as you walk into your kitchen to retrieve the washed, clean dishes, a leaking dishwasher is thrown in your face!Anyone would lose it.

In a situation like this, be cool and you may be able to fix the problem yourself without a repair technician! But before that, you need to know why your dishwasher has leaked.

 

6 Reasons Why Your Dishwasher Has Probably Leaked

First of all, if the leak occurs when you turn on your kitchen sink, chances are it’s a simple drainpipe concern. In this case, you just need to raise the dishwasher drainpipe above sink level and that should work.

However, if the leak happens when the dishwasher is turned on, there could be a range of different possibilities.

  1. Loosened door latch: A leaky dishwasher door is probably the most common reason for dishwasher leaks, and it is most likely to happen if the leaking water is accumulating directly under the door. This happens when the door latch is loosened and the door closes very easily. You can simply tighten the latch back with a screwdriver and you are good to go!
  1. Faulty gasket: Water accumulating in front of the dishwasher could also indicate a faulty gasket. You can check the seal around the door. Any wear out of the rubber gasket could cause the leaks. If that’s the case, change the gasket to have your dishwasher fresh as new!
  1. Damaged Spray Arm: The job of a damaged spray arm is to spin and rinse the dishes during the wash. Overloading the dishwasher in an improper manner can prevent it from spinning and even get it dislodged. You can check it out by simply removing the lower dish rack and seeing if the arm moves freely. If not, you have to get a new one, and from there, replacing the old one is just a piece of cake.
  1. Incorrect detergent: It may sound absurd, but using the incorrect detergent could cause leaks as well. So, if you are using regular dish soap in your dishwasher, stop! Regular dish soap foams up too much and causes pressure on the seal to cause leaks. Only use detergents specified for dishwashers to avoid this problem.
  1. Float switch faults: Dishwashers come with a float switch that apparently controls the level of water during the rinse cycle. After a certain height, no more water is allowed to enter the process. However, faults in the switch can cause high water due to overflow of water which causes leaks. If that is the case, you have to check the water levels at midcycle. If the water is overflowing, you know you have to get a new switch for your appliance.
  1. Damaged dishwater tubs: Putting excessive loads on the dishwater can cause leaks in the tub. Sometimes the detergent and minerals also corrode the tub due to the wearing out and cause massive problems. However, this is a long-time process. If you happen to notice this problem before it gets late, chances are you have to replace the entire dishwasher.

 

Leaking dishwashers are a very common problem in every household. However, fixing it is a very easy job and you can do it on your own with the right knowledge. This can help you save money from paying a repair technician.

So next time you have a leaked dishwasher, don’t panic! Look for these possible problems listed above and fix them yourself!

 

Leave a Reply